| Global Product Type | Building/Construction Paints & Primers |
| Pre-Consumer Recycled Content Percent | 1-3 Days (Full Cure) |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Color Family | White |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils |
| Disclaimer Statement | B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN. |
| Color(s) | White |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils |
| Age Recommendation | Ages 16 and Up |
| Application Temperature Range | 0º and 90ºF |
| Paint Sub-Category | Primer, Shellac-Based |
| Intended Application Environment | Interior/Exterior |
| Finish/Sheen | Flat |
| Packaging Type | Bucket/Pail |
| Binder/Vehicle Ingredient(s) | Shellac |
| Diluent/Solvent Ingredient(s) | Water |
| Application Method | Roller |
| Recommended Level of Ventilation | Moderate |
| Applicable Surface Material | Wood |
| Volume Capacity | 1 gal |
| Maximum Coverage Area | 500 sq ft |
| Product Biodegradability Indicator | N |
| Product Compostability Indicator | N |
| Product Biodegradability in Days | 0 |
| Cure/Dry-Time Range | 1-3 Days (Full Cure) |