Cisco Nexus 3524 Managed L2/L3 Gigabit Ethernet (10/100/1000) 1U Gray

Cisco Nexus 3524. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, USB 2.0 ports quantity: 1, Console port: RS-232. MAC address table: 64000 entries, Switching capacity: 480 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE.... Rack mounting, Form factor: 1U
Manufacturer: Cisco
SKU: 10653278
Manufacturer part number: N3K-C3524P-10G
MSRP: $14,000.00
$10,826.23
High Performance with Flexible Deployments The Cisco Nexus 3524 Switch, part of the Unified Fabric Family, is well suited for mainstream top-of-rack (TOR) data center deployments. It offers wire-rate Layer 2 and Layer 3 switching with a comprehensive feature set, including Algo Boost technology, and ultra-low latency. All comes in a compact, cost effective, 1-rack-unit (1RU) form factor. Features and Capabilities Algo Boost technology allows the Cisco Nexus 3524 to achieve exceptionally low latencies of 250 nanoseconds (ns) or less for all workloads. That includes unicast and multicast, and Layer 2 and 3, regardless of the features applied. Among other benefits: - Warp mode can further reduce latency to 190 ns for small-to-midsize Layer 2 and 3 deployments. - Warp SPAN helps enables stock market data delivery to trading servers in as little as 50 ns. - Active Buffer Monitoring helps you take advantage of market volatility and handle micro bursts. - Technology supports Network Address Translation (NAT) for trade execution on any venue, without a latency penalty. - Embedded Remote SPAN with nanosecond timestamps helps you monitor your traffic with unparalleled precision. Comprehensive Feature Set with Cisco NX-OS The Cisco Nexus 3524 is powered by the data-center-class Cisco NX-OS operating system. Features include: - Full-featured unicast protocols including BGP, OSPF, EIGRP, and RIP - Multicast protocols include PIM-SM, PIM-SSM, and MSDP - Full support for access control lists (ACLs; port, VLAN, and routed) and quality of service (QoS; queueing and marking) - Full support for troubleshooting tools such as Switched Port Analyzer (SPAN) and Ethanalyzer - Switch management by Cisco Prime Data Center Network Manager (DCNM)
High Performance with Flexible Deployments The Cisco Nexus 3524 Switch, part of the Unified Fabric Family, is well suited for mainstream top-of-rack (TOR) data center deployments. It offers wire-rate Layer 2 and Layer 3 switching with a comprehensive feature set, including Algo Boost technology, and ultra-low latency. All comes in a compact, cost effective, 1-rack-unit (1RU) form factor. Features and Capabilities Algo Boost technology allows the Cisco Nexus 3524 to achieve exceptionally low latencies of 250 nanoseconds (ns) or less for all workloads. That includes unicast and multicast, and Layer 2 and 3, regardless of the features applied. Among other benefits: - Warp mode can further reduce latency to 190 ns for small-to-midsize Layer 2 and 3 deployments. - Warp SPAN helps enables stock market data delivery to trading servers in as little as 50 ns. - Active Buffer Monitoring helps you take advantage of market volatility and handle micro bursts. - Technology supports Network Address Translation (NAT) for trade execution on any venue, without a latency penalty. - Embedded Remote SPAN with nanosecond timestamps helps you monitor your traffic with unparalleled precision. Comprehensive Feature Set with Cisco NX-OS The Cisco Nexus 3524 is powered by the data-center-class Cisco NX-OS operating system. Features include: - Full-featured unicast protocols including BGP, OSPF, EIGRP, and RIP - Multicast protocols include PIM-SM, PIM-SSM, and MSDP - Full support for access control lists (ACLs; port, VLAN, and routed) and quality of service (QoS; queueing and marking) - Full support for troubleshooting tools such as Switched Port Analyzer (SPAN) and Ethanalyzer - Switch management by Cisco Prime Data Center Network Manager (DCNM)
Products specifications
Attribute nameAttribute value
Heat dissipation904 BTU/h
Width17.3"
Depth18.4"
Height1.72"
Weight17.4 lbs
Switch TypeManaged
Switching capacity480 Gbit/s
Throughput360 Mpps
Number of VLANs4096
SFP+ module slots quantity24
Link aggregationY
Access Control List (ACL)Y
IP routingY
Technical details
Product colorGray
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity2
Design
Form factor1U
Operational conditions
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 85 %
Storage relative humidity (H-H)5 - 95 %
Operating altitude0 - 118110.2"
Power
Power consumption (typical)265 W
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Number of power supply units2
Features
Mean time between failures (MTBF)317030 h
Other features
Rack mountingY
MAC address table64000 entries
Performance
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Console portRS-232
Network
Jumbo frames supportY
10G supportY
VLAN supportY
Spanning tree protocolY
Data transmission
Packet buffer memory18 MB
Power over Ethernet (PoE)
Power over Ethernet (PoE)N
Management features
Switch layerL2/L3
Memory
Flash memory2048 MB
Protocols
Management protocolsSSHv2, SNMP v1/v2/v3, RADIUS, TACACS+
Supported network protocolsIPv4, IPv6