Tripp Lite B140-110 AV extender AV repeater Black

The B140-110 remote repeater unit can be added to your Tripp Lite B140-Series HDMI over Cat5 installation to expand the range and number of monitors. It transmits a DVI-D Single-Link signal up to 53.34 m (175-ft.) away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-110 is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Installation is simple; just insert the B140-110 repeater into the middle of your installation (Cannot be used with Passive extender kits or Passive receiver units). In the case of a B140-101X active extender kit, the built-in DVI connector on the transmitter is connected to the DVI source. It is then connected via Cat5e/6 cable to the B140-110, which is connected via Cat5e/6 cable to the B140-101X receiver unit. Finally, a monitor is connected to both the repeater and receiver units using Tripp Lite P561-Series DVI cable (not included). Connect up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a chain) A 1920 x 1080 @ 60Hz signal can be extended up to 38.1 m (125-ft.) from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 53.34 m (175-ft.) - Insert into your Tripp Lite B140-Series DVI over Cat5 installation to expand the range and number of monitors (Cannot be used with Passive extender kits or Passive receiver units) - Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz - Extends a 1920 x 1080 @ 60Hz signal up to 38.1 m (125-ft.), or a 1024 x 768 @ 60Hz signal up to 53.34 m (175-ft.) - Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution - Compatible with all operating systems - Plug and play, no software or drivers required - Features a built-in Equalization control for adjustment of the video image - Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz - Extends a 1920 x 1080 @ 60Hz signal up to 38.1 m (125-ft.), or a 1024 x 768 @ 60Hz signal up to 53.34 m (175-ft.) - Insert into your Tripp Lite B140-Series DVI over Cat5 installation to expand the range and number of monitors (Cannot be used with Passive extender kits or Passive receiver units) - Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a chain) - A 1920 x 1080 @ 60Hz signal can be extended up to 38.1 m (125-ft.) from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be extended up to 53.34 m (175-ft.) - Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution - Features a built-in Equalization control for adjustment of the video image - HDCP compatible - Compatible with all operating systems - Plug and play; no software or drivers required - International AC Adapter B110-INT required for use with UK, European, and Australian power connections