Tripp Lite PINV1000SW-120 power adapter/inverter Auto 1000 W Black

Tripp Lite PINV1000SW-120. Purpose: Car inverter, Power supply type: Auto, Input voltage: 12 V. Product color: Black, Housing material: Acrylonitrile butadiene styrene (ABS), Aluminum, Steel, Cooling type: Active. Sustainability certificates: Federal Communications Commission (FCC). Width: 14.5" (368.3 mm), Depth: 8.25" (209.6 mm), Height: 4.12" (104.6 mm). Quantity per pack: 1 pc(s), Package width: 10.4" (264.2 mm), Package depth: 17.2" (436.9 mm)
Manufacturer: Tripp Lite
SKU: 7477619
Manufacturer part number: PINV1000SW-120
MSRP: $506.00
$356.88
Mobile Sine Wave Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle You don’t have to be near an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 1000W mobile inverter converts 12V DC power from your car, utility truck, fleet vehicle, boat or RV’s battery into pure sine wave 110V AC power. Just connect the included battery cables between the PINV1000SW-120’s DC input terminals and the positive and negative terminals on your vehicle’s battery. AC Outlets Provide Portable Power for Your Mobile Applications This compact power inverter provides pure sine wave AC output for use at remote locations, such as campgrounds, construction sites and mobile offices. Three NEMA 5-15R outlets provide a continuous output of 1000W and a peak output of 2000W. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, telemetry equipment, smart battery rechargers for small battery-operated power tools, and mobile office equipment. USB Charging Ports Keep Your Devices at Full Strength A 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop or GPS unit without draining too much power from the vehicle’s battery. Includes the Latest Safety Features to Protect Your Equipment and Battery The on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle’s battery drops below 10V or exceeds 16V, the PINV1000SW-120 will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature-controlled fan system begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high/low voltage or fault conditions. Remote Control Module Allows Power Control from 20 ft. Away The included PINVSWRM remote control module with 20-foot (6-meter) cable connects to the telephone-style RJ12 jack on the inverter’s front panel. The module lets you mount the inverter out of sight, such as below your truck cab’s jump seat or inside the glove compartment, and operate it from your vehicle’s dashboard. The green LED confirms the inverter is powered on and operating correctly. Brackets Included for Permanent Mounting The durable aluminum housing withstands the rigors of worksites, construction sites, business trips and family vacations. Use the built-in mounting brackets and included hardware to permanently install the inverter in a horizontal position.

 

  • Provides pure sine wave power for appliances, power tools and other electronics
  • Ideal for areas without power outlets, such as construction sites or mobile offices
  • NEMA 5-15R outlets deliver continuous output of 1000W for powering devices
  • USB charging ports keep smartphones, tablets and laptops at full capacity
  • Wired remote module extends power control to cab of utility or work truck
Mobile Sine Wave Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle You don’t have to be near an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 1000W mobile inverter converts 12V DC power from your car, utility truck, fleet vehicle, boat or RV’s battery into pure sine wave 110V AC power. Just connect the included battery cables between the PINV1000SW-120’s DC input terminals and the positive and negative terminals on your vehicle’s battery. AC Outlets Provide Portable Power for Your Mobile Applications This compact power inverter provides pure sine wave AC output for use at remote locations, such as campgrounds, construction sites and mobile offices. Three NEMA 5-15R outlets provide a continuous output of 1000W and a peak output of 2000W. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, telemetry equipment, smart battery rechargers for small battery-operated power tools, and mobile office equipment. USB Charging Ports Keep Your Devices at Full Strength A 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop or GPS unit without draining too much power from the vehicle’s battery. Includes the Latest Safety Features to Protect Your Equipment and Battery The on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle’s battery drops below 10V or exceeds 16V, the PINV1000SW-120 will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature-controlled fan system begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high/low voltage or fault conditions. Remote Control Module Allows Power Control from 20 ft. Away The included PINVSWRM remote control module with 20-foot (6-meter) cable connects to the telephone-style RJ12 jack on the inverter’s front panel. The module lets you mount the inverter out of sight, such as below your truck cab’s jump seat or inside the glove compartment, and operate it from your vehicle’s dashboard. The green LED confirms the inverter is powered on and operating correctly. Brackets Included for Permanent Mounting The durable aluminum housing withstands the rigors of worksites, construction sites, business trips and family vacations. Use the built-in mounting brackets and included hardware to permanently install the inverter in a horizontal position.

 

  • Provides pure sine wave power for appliances, power tools and other electronics
  • Ideal for areas without power outlets, such as construction sites or mobile offices
  • NEMA 5-15R outlets deliver continuous output of 1000W for powering devices
  • USB charging ports keep smartphones, tablets and laptops at full capacity
  • Wired remote module extends power control to cab of utility or work truck
Products specifications
Attribute nameAttribute value
Height4.12"
Housing MaterialAcrylonitrile butadiene styrene (ABS), Aluminum, Steel
Master (outer) case GTIN (EAN/UPC)10037332266559
Master (outer) case weight32 lbs
Master (outer) case width17.8"
Country of OriginChina
Width14.5"
Depth8.25"
Weight8.6 lbs
Output frequency60 Hz
Master (outer) case height11.4"
Harmonized System (HS) code8504.40.9570
Master (outer) case length17.8"
Technical details
Sustainability certificatesFederal Communications Commission (FCC)
Sustainability complianceY
Product colorBlack
Packaging data
Package height5.7"
Package width10.4"
Package depth17.2"
Package weight10 lbs
Ports & interfaces
USB ports quantity2
Operational conditions
Storage relative humidity (H-H)0 - 95 %
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Power
Input voltage12 V
Power protection featuresOverload
Features
PurposeCar inverter
Cooling typeActive
Power supply typeAuto
Output voltage110 V
Power current typeDC-to-AC
Built-in fanY
Output power1000 W
LED indicatorsY
Packaging content
Quantity per pack1 pc(s)
Logistics data
Quantity per master (outer) case3 pc(s)