Tripp Lite PowerVerter power supply unit 750 W Silver

Tripp Lite PowerVerter. Total power: 750 W, AC input voltage: 120 V, Peak power: 1500 W. Certification: UL 458, CSA, Country of origin: China. Product color: Silver. Width: 8.75" (222.2 mm), Depth: 9" (228.6 mm), Height: 7" (177.8 mm). Package width: 10.7" (271.8 mm), Package depth: 10.7" (271.8 mm), Package height: 12.6" (320 mm)
Manufacturer: Tripp Lite
Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: 3298220
Manufacturer part number: UT750UL
MSRP: $1,012.76
$714.30
- 12V DC or 120VAC input; 120VAC output; 2 GFCI protected outlets - 750 watts continuous, 1125 watts OverPower and 1500 watts - DoubleBoost inverter output - 3 stage, 45A / 11A selectable wet / gel / AGM cell battery charger - Built-in Isobar® premium AC surge protection and Auto Transfer - Switching option for battery backup / UPS operation - Meets OSHA requirements Tripp Lite UT750UL Utility Work Truck Inverter / Charger are the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up to 750 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost inverter out put feature delivers up to 200% of continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable 11/45Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling – see owners manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on startup. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off switching and continuous status information. The UT750UL supports an unlimited amount of runtime with user-supplied batteries.
- 12V DC or 120VAC input; 120VAC output; 2 GFCI protected outlets - 750 watts continuous, 1125 watts OverPower and 1500 watts - DoubleBoost inverter output - 3 stage, 45A / 11A selectable wet / gel / AGM cell battery charger - Built-in Isobar® premium AC surge protection and Auto Transfer - Switching option for battery backup / UPS operation - Meets OSHA requirements Tripp Lite UT750UL Utility Work Truck Inverter / Charger are the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up to 750 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost inverter out put feature delivers up to 200% of continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable 11/45Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling – see owners manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on startup. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off switching and continuous status information. The UT750UL supports an unlimited amount of runtime with user-supplied batteries.
Products specifications
Attribute nameAttribute value
Master (outer) case weight20.2 lbs
Weight17.4 lbs
Packaging data
Package width10.7"
Design
CertificationUL 458, CSA
Power
Power protection featuresOver power, Overload