Tripp Lite SR42UBEXPND rack cabinet 42U Freestanding rack Black

Tripp Lite SR42UBEXPND. Type: Freestanding rack, Rack capacity: 42U, Maximum weight capacity: 3000.5 lbs (1361 kg). Weight: 160.9 lbs (73 kg). Product color: Black
Manufacturer: Tripp Lite
Availability: In stock
SKU: 2703552
Manufacturer part number: SR42UBEXPND
MSRP: $1,737.22
$1,187.39
This SmartRack open frame rack has no doors or side panels. It features integrated baying tabs to combine multiple racks in rows for data center applications. It is compatible with hot-aisle/cold-aisle configurations. The SR42UBEXPND houses 3000 lbs (1360.8 kgs) of standard 19-inch rack equipment in 42U. Square mounting holes on its rear and front vertical mounting rails adjust in quarter-inch increments from 4 to 37 inches. Each rack space is numbered for at-a-glance reference. An easy-to-read depth index ensures consistent rail placement without requiring time-consuming measurements. Two vertical mounting rails support toolless button-mount 0U installation of four compatible PDUs and cable managers. This makes it easier to route cabling to rack equipment and reduces cord clutter. Components are grounded to the enclosure frame. Threaded grounding points are provided for connection to the facility earth ground. To simplify deployment, the SR42UBEXPND includes preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances. Ships fully assembled for rapid deployment and rolls into place on heavy-duty pre-installed casters (casters are removable) Front and rear sets of equipment mounting rails adjust in 1/4" increments The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements Toolless accessory mounting rails (2 rails per enclosure) are compatible with 0U PDUs and vertical cable managers installed side-by-side Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories Mounting hardware included (50 M6 cage nuts and 50 M6 screws) Textured powder-coat finish stands up to busy, harsh applications, such as warehouses and basements Maximum usable internal depth of 37 in./94 cm (front to rear rail) Weight ratings: 3000 lbs (1360.8 kgs) stationary/2250 lbs (1020.6 kgs) rolling Built-in baying tabs allow secure combination of racks in rows with center-to-center width set at 600 mm or 24 in. to match standard floor tiles Removable leveling feet extend to allow positioning on uneven floors Compact design allows the rack to roll through standard-height commercial doorways Components are grounded to the structure, which includes multiple connections for facility ground. Open bottom, front and sides for convenient cable access
  • 42U premium open frame rack includes no sides or doors
  • 4 interior vertical posts with unthreaded square hole openings
  • Standard 24 in. (600 mm) width and 42 in. (1050 mm) depth for optimizing floor space
  • Ships fully assembled for use right away
  • 3000 lbs (1360.8 kgs) stationary and 2250 lbs (1020.6 kgs) rolling load capacity
  • Preinstalled heavy-duty 3 in. casters and leveling feet
  • Designed to roll through a standard 7-ft. (2.13 m) doorway
  • Includes 50 M6 cage nuts and 50 M6 screws for mounting equipment
This SmartRack open frame rack has no doors or side panels. It features integrated baying tabs to combine multiple racks in rows for data center applications. It is compatible with hot-aisle/cold-aisle configurations. The SR42UBEXPND houses 3000 lbs (1360.8 kgs) of standard 19-inch rack equipment in 42U. Square mounting holes on its rear and front vertical mounting rails adjust in quarter-inch increments from 4 to 37 inches. Each rack space is numbered for at-a-glance reference. An easy-to-read depth index ensures consistent rail placement without requiring time-consuming measurements. Two vertical mounting rails support toolless button-mount 0U installation of four compatible PDUs and cable managers. This makes it easier to route cabling to rack equipment and reduces cord clutter. Components are grounded to the enclosure frame. Threaded grounding points are provided for connection to the facility earth ground. To simplify deployment, the SR42UBEXPND includes preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances. Ships fully assembled for rapid deployment and rolls into place on heavy-duty pre-installed casters (casters are removable) Front and rear sets of equipment mounting rails adjust in 1/4" increments The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements Toolless accessory mounting rails (2 rails per enclosure) are compatible with 0U PDUs and vertical cable managers installed side-by-side Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories Mounting hardware included (50 M6 cage nuts and 50 M6 screws) Textured powder-coat finish stands up to busy, harsh applications, such as warehouses and basements Maximum usable internal depth of 37 in./94 cm (front to rear rail) Weight ratings: 3000 lbs (1360.8 kgs) stationary/2250 lbs (1020.6 kgs) rolling Built-in baying tabs allow secure combination of racks in rows with center-to-center width set at 600 mm or 24 in. to match standard floor tiles Removable leveling feet extend to allow positioning on uneven floors Compact design allows the rack to roll through standard-height commercial doorways Components are grounded to the structure, which includes multiple connections for facility ground. Open bottom, front and sides for convenient cable access
  • 42U premium open frame rack includes no sides or doors
  • 4 interior vertical posts with unthreaded square hole openings
  • Standard 24 in. (600 mm) width and 42 in. (1050 mm) depth for optimizing floor space
  • Ships fully assembled for use right away
  • 3000 lbs (1360.8 kgs) stationary and 2250 lbs (1020.6 kgs) rolling load capacity
  • Preinstalled heavy-duty 3 in. casters and leveling feet
  • Designed to roll through a standard 7-ft. (2.13 m) doorway
  • Includes 50 M6 cage nuts and 50 M6 screws for mounting equipment
Products specifications
Attribute nameAttribute value
Master (outer) case weight211 lbs
Master (outer) case length45.5"
Depth43"
Height78.5"
Weight160.9 lbs
Master (outer) case height85"
Packaging data
Package weight211 lbs
Package height85"
Design
CertificationEIA-310-D, IEC 60297-3-100, DIN 41494, RoHS, UL 60950
Features
Maximum weight capacity3000.5 lbs